The VTC-200C Vertical Machining Center features a powerful 40 Taper spindle, full traveling column design and fixed table for machining of extremely long and heavy workpieces. Or with a table center partition the machine work envelop can be transformed into two separate work areas that allow the machine to be in cycle in one work area, while a part is being set up in the other work area. The machine also delivers fast rapid traverse rates to reduce non-cut times.
- Long fixed table design
- Optional table partition available
- Standard 12,000-rpm CAT 40-taper spindle
- 1,181 ipm rapid traverse rate
- 24-tool (48 optional) storage capacity
- Automatic tool changer
- Maximum table load of 2,200 lbs.
|Capacity||Table Right/Left||78.740 in / 2000 mm|
|Table Longitudinal||20.080 in / 510 mm|
|Maximum Speed||12000 rpm|
|Motor Output (10 minute rating)||20.0 hp / 15 kw|
|Magazine||Number of Tools||24|
|Feed Axes||Travel (X Axis)||65.35 in / 1660 mm|
|Travel (Y Axis)||20.08 in / 510 mm|
|Travel (Z Axis)||20.08 in / 510 mm|