HQR-250MSY

Process: Turning

MACHINE DESCRIPTION:

The HQR-250MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume throughput. It machines parts complete – from raw material to finished part – in a single setup. 

MACHINE CHARACTERISTICS:

  • Twin-turret/twin spindle configuration for DONE IN ONE® processing
  • Upper and lower turrets with Y-axis for off-center machining
  • High-speed and high-torque main and milling spindles
  • High-speed rapid traverse rate for reduced non-cutting time
  • Balanced cutting and simultaneous 1st and 2nd ops for fast cycle times
  • Easily integrates with an optional bar feeder or robot loader/unloader

Machine Specifications

Specification Bed Length - 850U mm Bed Length - 1300U mm
Capacity Maximum Swing 14.60 in / 370 mm14.60 in / 370 mm
Maximum Machining Diameter 13.500 in / 344 mm13.500 in / 344 mm
Maximum Machining Length 33.900 in / 860 mm52.200 in / 1325 mm
Main Spindle Maximum Speed 4000 rpm 4000 rpm
Motor Output (30 minute rating) 35.0 hp / 26 kw35.0 hp / 26 kw
Second Spindle Maximum Speed 5000 rpm 5000 rpm
Motor Output (30 minute rating) 30.0 hp / 22 kw30.0 hp / 22 kw
Turret (Upper) Number of Tools 12 12
Maximum Speed 6000 rpm 6000 rpm
Motor Output (10 minute rating) 7.5 hp / 5 kw7.5 hp / 5 kw
Feed Axes Travel (X Axis) 8.20 in / 207 mm8.20 in / 207 mm
Travel (Y Axis) 4.00 in / 100 mm4.00 in / 100 mm
Travel (Z Axis) 29.87 in / 760 mm48.25 in / 1225 mm